Ana amfani da maƙallan hose da farko don kiyayewa da rufe tudu da bututu zuwa kayan aiki da bututu.Tsuntsayen tuƙi na tsutsa sun shahara sosai saboda ana iya daidaita su, masu sauƙin amfani kuma ba sa buƙatar kayan aiki na musamman - screwdriver, direban goro ko maƙallan socket shine duk abin da ake buƙata don shigarwa da cirewa.Ɗauren ƙwanƙwasa ƙugiya/masu tsutsotsi tare da ramummuka a cikin band ɗin don daidaita diamita na matsa akan kewayon kewayon.Za a iya fitar da band ɗin gaba ɗaya (buɗe) don haka za a iya shigar da maƙallan bututu a kan hoses da tubing ɗin da aka riga aka yi.Ana kuma amfani da su don aikace-aikacen da ba na hose iri-iri ba, kamar haɗawa ko haɗa wani abu zuwa wani.Ana iya sake amfani da maƙarƙashiyar hose kuma an san su da:

tsutsa fitar da tsutsa, tsutsa gear clamps, tsutsa dunƙule clamps.

Girman matsi na hose yana nufin kewayon diamita na matsa, wanda aka jera a matsayin mafi ƙanƙanta da matsakaicin diamita mai amfani, cikin inci;Hakanan ana ayyana wasu ƙugiya ta girman SAE (Ƙungiyoyin Injin Injiniya).Don tantance girman da ake buƙata, shigar da bututun (ko tubing) akan madaidaicin ko bututu (wanda ke faɗaɗa bututun), auna diamita na waje na bututun, sannan zaɓi matsi wanda zai ɗauki wannan diamita a kusan tsakiyar kewayon sa.Idan an san kewayen waje da aka shigar, raba shi da 3.14 (pi) don canza kewaye zuwa diamita.

Matsakaicin madaidaicin jeri na tiyo sune mafi na kowa kuma ana samun su a cikin abin hawa da aikace-aikacen masana'antu.Diamita mafi ƙarancin matsa shine 3/8 ″ kuma matsakaicin matsakaici shine kusan 8 7/16 ″.Suna da 1/2 ″ faffadan makada da 5/16 ″ ramukan hex kai sukurori.Waɗannan ƙuƙuman sun haɗu ko wuce ƙayyadaddun juzu'i na SAE.

Ana amfani da ƙananan igiyoyin ƙugiya tare da ƙananan diamita da bututu kamar iska, ruwa da layin mai.Mafi ƙarancin diamita shine 7/32 ″ kuma matsakaicin shine kusan 1 3/4 ″.Makadan suna faɗin 5/16 inci kuma dunƙule shine 1/4 ″ kan hex mai ramin rami.Ƙananan girman su yana ba da izinin shigarwa a wuraren da aka kulle.

Ko da yake ana iya haɗa maƙallan tiyo daga ƙarshe zuwa ƙarshe don ƙirƙirar al'ada ko manyan masu girma dabam, la'akari da yin amfani da Ƙirƙirar-A-Clamp maimakon yin matsi har zuwa 16 ft a diamita.Kits ɗin sun haɗa da mirgine ft 50 na 1/2 ″ faɗin bandeji wanda aka yanke shi cikin sauƙi zuwa tsayi, ɗakuna 20 (ƙarshen bandeji da gidaje tare da dunƙulewa / kayan tsutsotsi), da splices 10 don haɗa gajerun tsayin bandeji.Duk abubuwan da aka gyara bakin karfe ne kuma 5/16 ″ ramin hex kai sukurori daidai ne.Ba kamar sauran tsarin bandeji/ɗauri ba, babu kayan aiki na musamman da ake buƙata banda snips na kwano da screwdriver ko direban hex.Ana iya cire waɗannan tsutsotsin tudun tsutsa cikin sauƙi kuma a sake shigar da su, ko kuma a sanya su ƙarami ko girma (yanke bandeji don ƙarami; yi amfani da splice da ƙarin bandeji don yin girma).

Ƙwararren ƙwanƙwasa bakin karfe, wanda aka ba da shawarar don yawancin aikace-aikace, suna da bandeji na bakin karfe;da plated dunƙule da gidaje bayar da adalci lalata juriya.Don juriya mai kyau na lalata, zaɓi duk ƙugiya na bakin karfe, waɗanda ke da band ɗin bakin karfe, dunƙule da gidaje.Waɗannan maƙallan bututu masu inganci ana yin su ta hanyar masana'anta na gida.

A kan kayan aikin barb guda ɗaya, sanya matsin bututun a cikin wurin hutu.Akan kayan aikin barb da yawa, tabbatar cewa an sanya matsi akan sanduna.Kar a wuce shawarar ƙarfafa juzu'i don matsawa.

Ba a ba da shawarar yin amfani da waɗannan igiyoyi masu laushi don amfani da tukwane masu laushi, irin su silicone ba, saboda ana iya fitar da tiyo ko kuma a yi musu shege ta ramukan da ke cikin band ɗin.Hakanan, tabbatar da manne da kuka zaɓa ya dace da aikace-aikacen.